Aggregator Mode In Networked-Internet With Ipsec Vpn - Matrox Extio 3 Series User Manual

VPN tab
Details
Configuration - Import file
from USB
Configuration -
Authentication
VPN connect and VPN disconnect
Connect to the IPSec VPN using the
connected, use the

Aggregator mode in Networked-Internet with IPSec VPN

With aggregator mode, your Extio 3 receiver unit can gather video streams from multiple Extio 3
transmitter units into a single layout. The user operations in aggregator mode are similar whether the
user is connected in Networked-LAN, Networked-Internet / WAN with Site-to-Site VPN, or
Networked-Internet with IPSec VPN mode. For more information,
View the
Import the Strongswan.zip VPN configuration file.
A secret can be an authentication credential, or a private key
decryption passphrase.

Type – The secret
"ppk", "private", or "pkcs12".

Loaded – Secrets can be loaded from the configuration file,
or they can be dynamically loaded by the user.

Persistent – When a checkbox is present under
it means that the secret doesn't have to be re-loaded at
every VPN connection.
VPN connect
button to disconnect.
VPN disconnect
,
Configuration Connection
can be "eap", "xauth", "ntlm", "ike",
Type
button at the bottom, or if you are already
see "Aggregator mode", page
Matrox Extio 3 Series – User Guide 81
, and details here.
IP address
Persistent
,
68.