Receiver Input - Matrox Extio 3 Series User Manual

Analog audio, Line
In 4
* In aggregator mode, the A/V signal may come from a transmitter input other than the monitor on which it's displayed (for
example, monitor 1 shows a stream that comes from input 3 of a transmitter).
† In aggregator mode, the audio source switches from one transmitter to another when the mouse moves to a monitor showing
an image from a different transmitter.

Receiver input

Audio source from
receiver
Disabled
Microphone
Line In
Automatic
detection
106 Matrox Extio 3 Series – User Guide
Audio originates from the
connector of the transmitter.
Standard mode
When receiver connects to a unique
transmitter unit
No audio available on the
connector of the transmitter.
Audio from the
Microphone
of the receiver unit is sent to the
connector of the transmitter unit.
Out
Audio from the connector of the
Line In
receiver unit is sent to the
connector of the transmitter unit.
Audio from the
Microphone
of the receiver unit is sent to the
connector of the transmitter unit. If
Out
no cable is present on the
connector of the receiver unit, but a
cable is present on the
connector, the signal of the
connector is sent to the
connector of the transmitter unit.
Audio originates from the
connector of the transmitter unit
Line In
providing the video stream for
on the receiver unit.
4
When receiver connects to multiple
No audio available on any of the
Line Out
connectors of the transmitter.
Out
The
Microphone
connector receiver unit is sent to a transmitter
following the destination option
Line
chosen
destination", page
The
Line In
is sent to a transmitter following the
destination option chosen
Line Out
"Receiver audio destination",
page
Audio from the
connector
of the receiver unit is used. If no cable
Line
is present on the
of the receiver unit, but a cable is
Microphone
present on the
signal of the
Line Out
The signal is then sent to a transmitter
Line Out
following the destination option
Line Out
chosen
destination", page
Line In
Aggregator mode
transmitter units
signal from the
(see "Receiver audio
107).
signal from the receiver unit
(see
107).
connector
Microphone
connector
Microphone
connector, the
Line In
connector is used.
Line In
(see "Receiver audio
107).
monitor
Line