Accessing The Osd (On-Screen Display); Using The Osd (On-Screen Display) - Matrox Extio 3 Series User Manual

Accessing the OSD (On-Screen Display)

The OSD is available only with Extio 3 receiver devices. To access the OSD, enter the OSD keyboard
shortcut on the keyboard connected to your receiver. The default keyboard shortcut is the [Scroll
Lock] key.
Changing the OSD keyboard shortcut
You can change the keyboard shortcut used to access the OSD. To change the keyboard shortcut, use
the
OSD settings

Using the OSD (On-Screen Display)

Enabling Point-to-Point mode
Note:
from Networked-LAN or Networked-Internet / WAN with Site-to-Site VPN mode to
Point-to-Point mode), you need to perform a configuration reset of your devices. For more
information,
To use your devices in Point-to-point mode, click
Select your operation mode
functions", page
Basic functions
Wake up transmitter
Refresh connection
Close
option.
To change the operation mode of your Extio 3 configuration (for example, changing
see "Changing the operation mode of your devices", page
. Wait for the mode to be enabled. For more information,
55.
Click this to wake up your transmitter if it turns off.
Click this if the connection between your receiver and
transmitter devices is lost. Wait while your connection is
refreshed.
Click this to close the OSD.
from the OSD startup screen, under
Point-to-Point
Matrox Extio 3 Series – User Guide 55
85.
see "Basic