Table of Contents
Advertisement
When a stream connection is active,
tab
Connection
option is disabled.
When connected to an aggregated layout, you will have individual control over
of all transmitters in the aggregated layout.
control
Note: The
to read the information shown but not modify it.
File structure and syntax for Swanctl.json
See
"Appendix E - File structure for swanctl.json", page
File structure for the VPN configuration file (strongswan.zip)
The following is the file structure that should be used for creating the Strongswan.zip file:
strongswan.zip/
strongswan.zip/swanctl.json --> Mandatory, describes swanctl.conf
strongswan.zip/triplets.dat --> Optional, copied to /etc/ipsec.d/triplets.dat
strongswan.zip/x509/ --> Optional, copied recursively to /etc/swanctl/x509
strongswan.zip/x509ca/ --> Optional, copied recursively to /etc/swanctl/x509ca
strongswan.zip/x509aa/ --> Optional, copied recursively to /etc/swanctl/x509aa
strongswan.zip/x509ac/ --> Optional, copied recursively to /etc/swanctl/x509ac
strongswan.zip/x509crl/ --> Optional, copied recursively to /etc/swanctl/x509crl
strongswan.zip/x509ocsp/ --> Optional, copied recursively to /etc/swanctl/x509ocsp
strongswan.zip/private/ --> Optional, copied recursively to /etc/swanctl/private
strongswan.zip/pubkey/ --> Optional, copied recursively to /etc/swanctl/pubkeys
strongswan.zip/pkcs12/ --> Optional, copied recursively to /etc/swanctl/pkcs12
The zip file can also have the following structure:
strongswan.zip/<folder>/swanctl.json
strongswan.zip/<folder>/...
26 Matrox Extio 3 Series – User Guide
Congestion control
tab.
: If the transmitter setting is currently set to Off, the
Note
tab in the ECM is not enabled while in the VPN mode. You will be able
Network
level can be set from the OSD
108.
Receiver
Congestion control
and
MTU
Congestion
Advertisement
Table of Contents
