Table of Contents
Advertisement
Repeater unit
Matrox Veos Repeater Unit
Additional hardware required
To connect your Matrox Veos product, you also need the following hardware:
Supported coaxial cables
RS-232 serial cables (only if connecting RS-232 monitors)
Repeater unit – PoE (Power Over Ethernet) power supply unit and twisted pair cables
(CAT5 or CAT6)
Software supplied
Professional x64, and Windows Vista)
Matrox PowerDesk-SE – to use your Matrox product. Matrox makes new display drivers
available on the Matrox Technical Support Web site
(www.matrox.com/graphics/support/drivers).
Installation overview
To install your Matrox product:
Connect your monitors and Veos units –
1
Install the software –
2
(for Windows 2000, Windows XP, Windows XP
see "Software setup", page
see "Connection setup", page
13.
Matrox Veos – User Guide
4.
3
Advertisement
Table of Contents
