Configuration Management - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Commissioning via operating menu
76
11.6

Configuration management

After commissioning, you can save the current device configuration, copy it to another
measuring point or restore the previous device configuration. You can do so using the
Configuration management parameter and the options available.
Path in the menu
Setup → Advanced setup → Configuration backup display → Configuration management
Meaning of the options
• Cancel
No action is executed and the user exits the parameter.
• Execute backup
A backup copy of the current device configuration is saved from the HistoROM
(integrated in the device) to the display module of the device.
• Restore
The last backup copy of the device configuration is copied from the display module to the
HistoROM of the device.
• Duplicate
The transmitter configuration of the device is duplicated to another device using the
display module. The following parameters, which characterize the individual measuring
point are not transferred:
Medium type
• Compare
The device configuration saved in the display module is compared to the current device
configuration of the HistoROM. The result of the comparison is displayed in the
Comparison result parameter.
• Clear backup data
The backup copy of the device configuration is deleted from the display module of the
device.
While this action is in progress, the configuration cannot be edited via the local
display and a message on the processing status appears on the display.
If an existing backup copy is restored on a device other than the original device using
the Restore option, in some cases individual device functions may not be available. In
some cases it is also not possible to restore the original state by resetting to the "as-
delivered" state.
The Duplicate option should always be used to copy the configuration to another
device.
Levelflex FMP55 FOUNDATION Fieldbus
Endress+Hauser