Mounting; Mounting Requirements; Suitable Mounting Position - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Levelflex FMP55 FOUNDATION Fieldbus
Endress+Hauser
6

Mounting

6.1

Mounting requirements

6.1.1

Suitable mounting position

 4 Mounting position of Levelflex FMP55
• Rod probes/rope probes: mount in the bypass/stilling well.
• Coax probes can be mounted at any distance from the wall.
• When mounting outdoors, a weather protection cover can be used to protect the device
against extreme weather conditions.
• Minimum distance from the end of the probe to the bottom of the vessel: 10 mm (0.4 in)
Mounting
A0011281
19