Endress+Hauser Levelflex FMP55 Operating Instructions Manual page 154

Operating menu
User entry
Level linearized
Navigation
Description
Additional information
Interface linearized
Navigation
Prerequisite
Description
Additional information
Maximum value
Navigation
Prerequisite
User entry
Diameter
Navigation
Prerequisite
154
Up to 32 alphanumerical characters (letters, numbers, special characters)
 Setup → Advanced setup → Linearization → Level linearized
Displays linearized level.
• The unit is defined by the Unit after linearization parameter →  152.
• For interface measurements, this parameter always refers to the total level.
 Setup → Advanced setup → Linearization → Interf. lineariz
Operating mode (→  126) = Interface or Interface with capacitance
Displays the linearized interface height.
The unit is defined in the Unit after linearization parameter →  152.
 Setup → Advanced setup → Linearization → Maximum value
Linearization type (→  151) has one of the following values:
• Linear
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
–50 000.0 to 50 000.0 %
 Setup → Advanced setup → Linearization → Diameter
Linearization type (→  151) has one of the following values:
• Horizontal cylinder
• Sphere
Levelflex FMP55 FOUNDATION Fieldbus
Endress+Hauser

