Table of Contents
Advertisement
4 CONFIGURATION
4.8.2 Real Time Alarms
Enter the tag to be used in the Alarm Event log – see
Section 2.7.
Select the day(s) on which the alarm is activated.
Set to 'On' to activate the real-time alarm on the first day of
each month.
Set the time at which the alarm becomes active.
If 'Every hour' is set to 'On', the 'Hours' setting cannot be
adjusted and the alarm is activated at the same time every
hour (determined by the 'minutes' setting) or on the hour if
'Minutes' is set to 'Off'.
Set the duration for the alarm to remain active.
Set to 'On' to add an entry to the Alarm Event log each time
the real-time alarm becomes active.
95
Advertisement
Table of Contents
