Table of Contents
Advertisement
4.4.5 Users
Notes.
• User 1 is the System Administrator and is able to change user names/access privileges and enter initial passwords for all
other users. Other users cannot change their user names and access privileges once set by User 1. All users may change
their own passwords.
• The following parameters are displayed only if 'Security system' is set to 'Basic' – see Section 4.4.4.
Set the user name(s) and associated password(s) to be used
to access the Configuration level when 'Configuration
security' is set to 'Password protected' – see below.
Enter a name for the selected user.
Enter an initial password for the selected user.
Set access privileges for the selected user.
Enabled
– The selected user is able to access the
Configuration level.
No access
– The selected user is unable to access to
the Configuration level.
Note. When the method of access to the Configuration level
is set to 'Password protected' (see Section 4.4.4) and a user
with Configuration level access privileges changes the
instrument's configuration, the 'Name' of the user is
included in the audit log entry.
4 CONFIGURATION...
57
Advertisement
Table of Contents
