ABB InformIT SM2000 User Manual page 58

...4 CONFIGURATION
...4.4.4 Security
Note. The following parameters:
• are displayed only if 'Security system' is set to 'Advanced' – see page 55.
• can be changed only by the System Administrator (User 1).
56
Passwords are entered initially by the System Administrator
but, subsequently, any user can change their own password.
When this parameter is set to 'Yes', each user must change
their password after it is used for the first time following initial
configuration – see also Section 4.4.5.
Enter the time period after which all passwords expire. After
this period of time, all users must change their passwords.
Enter the time period after which an inactive user's access
privileges are de-activated. A user is considered inactive if
their password has not been used. A user is de-activated by
removal of their access privileges and can be re-activated
only by the System Administrator (User 1).
Enter the number of consecutive incorrect password entries
allowed by a user. If the number of incorrect entries exceeds
this limit, the user's access privileges are de-activated and
can be reinstated only by the System Administrator (User 1).
Passwords have a maximum length of 20 characters. Enter
the minimum length required for all new passwords.