Advertisement
Quick Links
IP54 sealing gasket for RVT
Installation guide
Technical specification
The IP54 sealing for RVT gives a protection from the front panel
side.
− IP5X :
• Dust-protected. Ingress of dust is not totally prevented,
but dust shall not penetrate in a quantity to interfere
with satisfactory operation of the apparatus or to impair
safety.
• Wire protected. Protected against access to hazardous
parts with a wire of diameter 1 mm.
− IPX4 :
• Protected against splashing water. Water splashed
against the enclosure from any direction shall have no
harmful effects.
IP54 sealing installation
Step 1: Slide the RVT (a) perpendicularly to the capacitor bank
cubicle.
Step 2: Rotate the RVT (b) to insert it into the capacitor bank
cubicle.
Step 2
(b)
Note: cut out dimensions are 138x138 mm.
Step 1
(a)
Advertisement
Related Manuals for ABB IP54
Summary of Contents for ABB IP54
- Page 1 Step 1: Slide the RVT (a) perpendicularly to the capacitor bank cubicle. Step 2: Rotate the RVT (b) to insert it into the capacitor bank cubicle. Technical specification The IP54 sealing for RVT gives a protection from the front panel Step 1 Step 2 side. − IP5X : • Dust-protected.
- Page 2 Step 6: Turn lightly the screw (e) into the mounting brackets. Fax: +32 (0) 71 344 007 Email: Power.Quality@be.abb.com Step 7: If any hole still exists (check the corners of the controller) a 2nd IP54 can be placed around the 1st one.
Need help?
Do you have a question about the IP54 and is the answer not in the manual?
Questions and answers