Table of Contents
Advertisement
CMTS 1000 Installation Manual V1.2
Command
help
help <command>
authentication
bp
community
elog
exit
get
ipaddress
logout
Manage
modems
more
The downstream and upstream port statistics count additional MAC man-
agement messages that are part of the DOCSIS protocol; these are not
counted in the cable statistics.
This is a simple check to determine whether the Ethernet and Cable inter-
faces are working at all.
4-6
Table 4-1 CMTS 1000 CLI Commands
Description
Prints the console commands.
Prints detailed help on the commands.
Sets authentication screen.
Sets/displays baseline privacy information.
Modifies, adds or deletes CLI session community.
Displays the event log. This is particularly useful
because it shows when modems go off-line.
Exits the consoles session.
Gets an SNMP object.
Sets/displays IP addressing.
Exits the consoles session.
Manages the MIB.
Displays the modems that the CMTS is currently
seeing and whether each modem has registered.
Note that when a modem goes off-line it disappears
from this table. The "index" numbers in the table
always increment, which lets you see whether
modems went off-line. Equivalent MIB:
docsIfCmtsCmStatusTable, which gives you more
information.
When mode is on, allows controlled access to more
than 24 lines of display.
302693-B Rev 00
Hide quick links:
Advertisement
Table of Contents
