Nortel CMTS 1000 Install Manual page 232

CMTS 1000 Installation Manual V1.2
DocsBpiMulticastAuthEntry
Describes the multicast SID authorization for each CM on each CMTS
MAC interface.
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the DocsBpiMulticastAuthEntry table.
ifIndex
Variable Name:
Set/Get Response/Status:
Description:
ServiceId
Variable Name:
Set/Get Response/Status:
Description:
CmMacAddress
Variable Name:
Set/Get Response/Status:
Description:
4-140
ifIndex
Number
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber.
The value of each interface must remain con-
stant at least from one reinitialization of the
emtity's network management system to the
next reinitialization.
docsBpiMulticastServiceId
Number
The multicast SID for authorization.
docsBpiMulticastCmMacAddress
MacAddress
The MAC address of the CM to which the
multicast SID authorization applies.
302693-B Rev 00