Nortel CMTS 1000 Install Manual page 122

CMTS 1000 Installation Manual V1.2
Event_Log
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the docsDevEventEntry table.
Index
Variable Name:
Set/Get Response/Status:
Description:
FirstTime
Variable Name:
Set/Get Response/Status:
Description:
4-30
docsDevEvIndex
Number
Provides relative ordering of the objects in
the event log. This object will always
increase except when:
a) The log is reset via docsDevEvControl,
b) The device reboots and does not
implement nonvolatile storage for this log,
or
c) It reaches the value 2^31.
The next entry for all the above cases is 1.
docsDevEvFirstTime
DateAndTime
The time that this entry was created.
302693-B Rev 00