Table of Contents
Advertisement
CMTS 1000 Installation Manual V1.2
Select the Apply option to fill in the network subnet mask and other net-
work fields with default values that may have been entered when you
defined your networks. The values are the network-wide values. These
fields may still be modified to customize an individual cable modem after
the defaults have been applied.
MAC Address
This field is the MAC address of the cable modem. The information is
available from the cable modem label.
Serial Number
If you need to enter a cable modem serial number directly, it is available
from the cable modem label. Type it into the field or read it from the bar
code label on the cable modem with an appropriate bar code reader.
IP Address
The IP address is used in the management of the cable modem. It does not
need to be a globally routable IP address. Normally, it will be assigned by
the network operations group. The address will be transferred to the DHCP
server. The LCn run time component uses the IP address when the network
configuration files are updated. The IP address is transferred to the modem
when it boots.
Subnet Mask
This field allows you to enter the IP address mask to this cable modem that
will be used by all CMs in this network. The value for the mask should be
provided by the network operations department.
Gateway
The entry in this field is the default gateway IP address. It is to be used by
all CMs in this network to access all networks other than the local one. The
value should be provided by the network operations department.
3-28
302693-B Rev 00
Hide quick links:
Advertisement
Table of Contents
