Nortel CMTS 1000 Install Manual page 127

Control
Variable Name:
Set/Get Response/Status:
Description:
IFIndex
Variable Name:
Set/Get Response/Status:
Description:
Direction
Variable Name:
Set/Get Response/Status:
Description:
302693-B Rev 00
docsDevFilterIpControl
discard(1), accept(2)
If set to discard(1), all packets matching this
filter will be discarded, and scanning of the
remainder of the filter list will be aborted. If
set to accept(2), all packets matching this fil-
ter will be accepted for further processing
(e.g., bridging) and scanning of the remainder
of the filter list will be aborted.
docsDevFilterIpIfIndex
InterfaceIndexOrZero
The entry interface to which this filter
applies. The value corresponds to ifIndex for
either a CATV MAC or another network
interface. If the value is zero, the filter applies
to all interfaces. Default value in Cable
Modems is the customer-side interface. In
Cable Modem Termination Systems, this
object has to be specified to create a row in
this table.
docsDevFilterIpDirection
inbound(1), outbound(2), both(3)
Determines whether the filter is applied to
inbound(1) traffic, outbound(2) traffic, or
traffic in both(3) directions.
Troubleshooting
4-35