Nortel CMTS 1000 Install Manual page 72

CMTS 1000 Installation Manual V1.2
EVControl
This option allows you to add an Event Control entry to all CMs on this
network. An Event Control must be created using the LCn Control Panel
MIB Objects Tab Event Control option before you can add an EVControl
to a network.
Done
This option returns you to the previous screen.
Cancel
This option button allows you to cancel any changes that you made to the
Enter Cable Modem Data screen. LCn returns you to the Modem select
screen.
Apply to Modems
When you click on the Apply to Modems option button, LCn applies the
entered Network Data parameters to all cable modems on this network.
LCn provides an opportunity for you to accept or decline the changes.
This process can also be implemented from the Enter Cable Modem Data
screen. Refer to the Enter Cable Modem Data section for information on
entering Network Defaults for individual cable modems.
Class of Service
You use this button to enter Class of Service as a Network Default. Class of
Service can also be assigned to each modem individually by clicking on the
Class of Service option button accessed from the Enter Cable Modem Data
screen.
Refer to the Enter Cable Modem Data section for information on entering
Class of Service for individual cable modems.
3-24 302693-B Rev 00