Nortel CMTS 1000 Install Manual page 119

ThrottleAdminStatus
Variable Name:
Set/Get Response/Status:
Description:
ThrottleInhibited
Variable Name:
Set/Get Response/Status:
Description:
302693-B Rev 00
docsDevEvThrottleAdminStatus
unconstrained(1), maintainBelowThresh-
old(2), stopAtThreshold(3), inhibited(4)
Controls the transmission of traps and syslog
messages with respect to the trap-pacing
threshold. unconstrained(1) causes traps and
syslog messages to be transmitted without
regard to the threshold settings. maintainBe-
lowThreshold(2) causes trap transmission and
syslog messages to be suppressed if the num-
ber of traps would otherwise exceed the
threshold. stopAtThreshold(3) causes trap
transmission to cease at the threshold, and not
resume until directed to do so. inhibited(4)
causes all trap transmission and syslog mes-
sages to be suppressed.
A single event is always treated as a single
event for threshold counting. That is, an event
causing both a trap and a syslog message is
still treated as a single event.
Writing to this object resets the thresholding
state.
docsDevEvThrottleInhibited
TruthValue
If true(1), trap and syslog transmissions are
currently inhibited due to thresholds and/or
current setting of docsDevEvThrottleAdmin-
Status.
Troubleshooting
4-27