Nortel CMTS 1000 Install Manual page 158

CMTS 1000 Installation Manual V1.2
ifCmtsStatusEntry
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the docsIfCmtsStatusEntry table.
For the MAC layer, this group maintains a number of status objects and
counters. It includes the Status entry for a single MAC layer. An entry in
this table exists for each ifEntry with an ifType of docsCableMa-
clayer(127).
ifIndex
Variable Name:
Set/Get Response/Status:
Description:
InvalidRangeReqs
Variable Name:
Set/Get Response/Status:
Description:
4-66
ifIndex
Number
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber.
The value of each interface must remain con-
stant at least from one reinitialization of the
emtity's network management system to the
next reinitialization.
docsIfCmtsStatusInvalidRangeReqs
Number
This object counts invalid RNG-REQ mes-
sages received on this interface.
302693-B Rev 00