Table of Contents
Advertisement
LLC Filters
This option allows you to add a Logical Link Control (LLC) filter to all
CMs on this network. An LLC filter must be created using the LCn Control
Panel MIB Objects Tab Filters option before you can add a filter type to a
network.
IP Filters
This option allows you to add an Internet Protocol (IP) filter to all CMs on
this network. An IP filter must be created using the LCn Control Panel
MIB Objects Tab Filters option before you can add an IP Filter to a net-
work.
SNMP Write
The entry in this field is the SNMP community to which the CM belongs
for SNMP sets. The community string entered here must match the one
used by the network manager in order for a CM to reply to an SNMP set.
A manager knowing this string has write access to the CM. It is used in all
SNMP set requests by a network manager.
MIB Objects
This option allows you to add a MIB object to all CMs on this network. A
MIB object must be created using the LCn Control Panel Admin Tab MIB
objects option before you can add a MIB Object to a network.
NMAccess
This option allows you to add IP addresses of Network Management sta-
tions with specific access levels to all CMs on this network. An NMAccess
entry must be created using the LCn Control Panel MIB Objects Tab
NMAccess option before you can add an authorized Network Management
station to a network.
302693-B Rev 00
Startup Operation Procedures
3-23
Hide quick links:
Advertisement
Table of Contents
