Nortel CMTS 1000 Install Manual page 193

LcTrapTypeEntry
An entry in this table defines a particular trap type supported by the system.
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the LcTrapTypeEntry table.
Index
Variable Name:
Set/Get Response/Status:
Description:
Status
Variable Name:
Set/Get Response/Status:
Description:
302693-B Rev 00
lcTrapTypeIndex
Number: coldstartTrap(1), warmstartTrap(2),
linkUpTrap(3), linkDownTrap(4), authentica-
tionFailureTrap(5), topologyChangeTrap(6),
newRootTrap(7)
The variable is the index of this entry in the
lcTrapTypeTable.
lcTrapTypeStatus
Number: sendTrap(1), this type of trap should
be sent; noTrap(2), this type of trap should
NOT be sent
This variable controls whether this type of
trap is generated by this device.
Troubleshooting
4-101