Nortel CMTS 1000 Install Manual page 196

CMTS 1000 Installation Manual V1.2
OperState
Variable Name:
Set/Get Response/Status:
Description:
Ttl
Variable Name:
Set/Get Response/Status:
Description:
LcPhyEntry
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the LcPhyEntry table.
Index
Variable Name:
Set/Get Response/Status:
Description:
4-104
lcMcastOperState
Number: nonmember(1), delaying(2), idle(3),
static(4)
Reflects the IGMP state of this address. If
static(4), the entry was created as a result of
management action, and the entry is not
subject to the IGMP protocol.
lcMcastTtl
Number: TimeTicks
Time-to-live for this entry. Will return zero
for static entries.
lcPhyIndex
Number: primary(1), aux1(2)
Name/Index for each Ethernet PHY.
302693-B Rev 00