Docsbpicmtstekentry - Nortel CMTS 1000 Install Manual

CMTS 1000 Installation Manual V1.2
ErrorCode
Variable Name:
Set/Get Response/Status:
Description:
ErrorString
Variable Name:
Set/Get Response/Status:
Description:

DocsBpiCmtsTEKEntry

Describes the attributes of each CM Traffic Encryption Key (TEK) associ-
ation. The CMTS maintains one TEK association per SID on each CMTS
MAC interface.
The following paragraphs include the SNMP Syntax (Set/Get Response
and/or Status) and a general description of the status entry for each MIB
variable in the DocsBpiCmtsTEKEntry table.
4-132
docsBpiCmtsAuthInvalidErrorCode
Number: none(1), unknown(2), unauth-
orizedCm(3), unsolicited(5), invalidKey-
Sequence(6), keyRequestAuthentication-
Failure(7)
Error-Code in most recent Authorization
Invalid message transmitted to the CM. This
has value unknown(2) if the last Error-Code
value was 0, and none(1) if no Authorization
Invalid message has been transmitted to the
CM.
docsBpiCmtsAuthInvalidErrorString
DisplayString
Display-String in most recent Authorization
Invalid message transmitted to the CM. This
is a zero length string if no Authorization
Invalid message has been transmitted to the
CM.
302693-B Rev 00