Nortel CMTS 1000 Install Manual page 211

BpiCmTEKPrivacyEnable
Variable Name:
Set/Get Response/Status:
Description:
BpiCmTEKState
Variable Name:
Set/Get Response/Status:
Description:
302693-B Rev 00
docsBpiCmTEKPrivacyEnable
TruthValue
This identifies whether this SID is provi-
sioned to run Baseline Privacy. This is analo-
gous to enabling Baseline Privacy on a
provisioned SID using the Class-of-Service
Privacy Enable option as described in BPI
Appendix A.1.2. This object may be set to
True or False at any time (causing the CM to
send a Reauth event to the authorization
machine), regardless of whether Baseline Pri-
vacy is enabled for the CM. However, Base-
line Privacy is not effectively enabled for any
SID unless Baseline Privacy is enabled for
the CM, which is managed via the docsBpiC-
mPrivacyEnable object.
docsBpiCmTEKState
Number: start(1), opWait(2), opReauth-
Wait(3), operational(4), rekeyWait(5), rekey-
ReauthWait(6)
The state of the indicated TEK FSM. The
start(1) state indicates that FSM is in its initial
state.
Troubleshooting
4-119