Nortel CMTS 1000 Install Manual page 166

CMTS 1000 Installation Manual V1.2
Id
Variable Name:
Set/Get Response/Status:
Description:
CmStatusIndex
Variable Name:
Set/Get Response/Status:
Description:
AdminStatus
Variable Name:
Set/Get Response/Status:
Description:
4-74
docsIfCmtsServiceId
Number
Identifies a service queue for upstream band-
width. The attributes of this service queue are
shared between the Cable Modem and the
Cable Modem Termination System. The
CMTS allocates upstream bandwidth to this
service queue based on requests from the CM
and on the class of service associated with
this queue.
docsIfCmtsServiceCmStatusIndex
Number
Pointer to an entry in docsIfCmtsCmStatus-
Table identifying the Cable Modem using this
Service Queue. If multiple Cable Modems are
using this Service Queue, the value of this
object is zero.
docsIfCmtsServiceAdminStatus
Number: enabled(1), disabled(2),
destroyed(3)
Allows a service class for a particular modem
to be suppressed, (re-)enabled, or deleted
altogether.
302693-B Rev 00