Nortel CMTS 1000 Install Manual page 128

CMTS 1000 Installation Manual V1.2
Broadcast
Variable Name:
Set/Get Response/Status:
Description:
Saddr
Variable Name:
Set/Get Response/Status:
Description:
Smask
Variable Name:
Set/Get Response/Status:
Description:
DAddr
Variable Name:
Set/Get Response/Status:
Description:
4-36
docsDevFilterIpBroadcast
TruthValue
If set to true(1), the filter only applies to mul-
ticast and broadcast traffic. If set to false(2),
the filter applies to all traffic.
docsDevFilterIpSaddr
IP Address
The source IP address, or portion thereof, that
is to be matched for this filter.
docsDevFilterIpSmask
IP Address
A bit mask that is to be applied to the source
address prior to matching. This mask is not
necessarily the same as a subnet mask, but 1's
bits must be leftmost and contiguous.
docsDevFilterIpDaddr
IP Address
The destination IP address, or portion thereof,
that is to be matched for this filter.
302693-B Rev 00