Nortel CMTS 1000 Install Manual page 169

Control
Variable Name:
Set/Get Response/Status:
Description:
Type
Variable Name:
Set/Get Response/Status:
Description:
PreambleLen
Variable Name:
Set/Get Response/Status:
Description:
DifferentialEncoding
Variable Name:
Set/Get Response/Status:
Description:
302693-B Rev 00
docsIfCmtsModControl
RowStatus: active, notInService, notReady,
createAndGo, createAndWait, destroy
Controls and reflects the status of rows in this
table.
docsIfCmtsModType
Number: other(1), qpsk(2), qam16(3)
The modulation type used on this channel.
docsIfCmtsModPreambleLen
Number
The preamble length for this modulation pro-
file in bits. Default value is the minimum
needed by the implementation at the CMTS
for the given modulation profile.
docsIfCmtsModDifferentialEncoding
TruthValue
Specifies whether or not differential encoding
is used on this channel.
Troubleshooting
4-77