Nortel CMTS 1000 Install Manual page 69

Nortel versalar cmts 1000 modem system: install guide
Hide thumbs Also See for CMTS 1000:
Table of Contents

Advertisement

Gateway
The entry in this field is the default gateway IP address. It is to be used by
all CMs in this network to access all networks other than the local one. The
value should be provided by the network operation's department.
Log Server
The entry in this field is the IP address of the log server. It is used by all
CMs in this network. If the parameters read from the LCn during boot up
are not acceptable due to an invalid message digest, the LCn sends an
SNMP trap to the log server. The value should be provided by the network
operations department.
Time Server
The entry in this field is the IP address of the Time Server. It is used by all
CMs in this network.
Upgrade Server
The entry in this field is the IP address of the Upgrade Server. It is used by
all CMs in this network.
Upgrade File Name
This entry is the TFTP file name of the CM operating software that you
wish to have the CM load during an automatic software upgrade.
DHCP Lease Time
The length of time for which the assigned IP address is valid. The lease will
be automatically renewed.
302693-B Rev 00
Startup Operation Procedures
3-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents