Nortel CMTS 1000 Install Manual page 86

CMTS 1000 Installation Manual V1.2
The following fields appear on this screen.
Name
This free-format field enables you to assign a name to the CMTS.
Network
This option enables you to assign this CMTS to a network. Its pull down
menu displays the networks that were defined for this system (refer to the
network parameter section of this document). The CMTS must be assigned
to an existing network; it inherits parameters from the network. When you
select a network, a pop up dialog box asks if the network defaults should be
applied to this CMTS.
Select the Apply option to fill in the network Subnet Mask and other net-
work fields with default values that may have been entered when you
defined your networks. The values are the network-wide values. These
fields may still be modified to customize an individual CMTS after the
defaults have been applied.
MAC Address
This field is the MAC address of the CMTS. The information is available
from the CMTS label.
Serial Number
If you need to enter a CMTS serial number directly, it is available from the
CMTS label. Type it into the field or read it from the bar code label on the
CMTS with an appropriate bar code reader.
3-38 302693-B Rev 00