Nortel Contact Center Manager User Manual page 192

Voice-processing subsystem configuration
Extended superframe configuration
To configure the MPS for groundstart signaling and extended superframe
format, modify the lineside_T1_proto.cfg file as shown in the following
example:
;
[SPAN_CLASS]
CLASS_NAME
CDF
STATE_TBL
PARAM TIM_standby_mode
PARAM TIM_answer
PARAM TIM_total_call
PARAM TIM_sby_on_discF
PARAM TIM_CPD_name
PARAM TIM_DTMF_name
PARAM TIM_TGEN_name
PARAM TIM_pickup_time
PARAM TIM_param_6 = 200! Auto Connect Time !
PARAM TIM_param_9 = 1
PARAM TIM_param_10 = 1 ! GroundStart = 1; Loopstart = 0;
Default 0 !
To control and monitor MPS span status
The Diagnostic Logging and Tracing (DLT) utility controls the MPS span status.
DLT commands run from the DLT shell. The DLT shell is entered by invoking
the DLT utility in the current shell (Solaris) or in a Command Prompt window
(Win32).
The DLT command devlist displays a comprehensive hierarchical list of
physical devices and logical instances that reside on the current component
(TMS). Physical devices, such as phone lines and DSPs, are identified by
chassis, TMS slot, card, and device number (for example, span and DSP).
192
= linesideT1
= t1_esf_cas.cdf
= linesideT1.bin
= lineNOANSWER
= 0
= TRUE
= 32
= 1
= "CPD"
= "DTMF"
= "TGEN"
Contact Center Manager
Standard 4.06