Nortel Contact Center Manager User Manual page 185

August 2007
Saving the .ini file
Protect the MG 3200 configuration by saving the .ini file on the MG 3200 to
your PC. Later, if a you replace a device or if a device loses its programming
data, you can restore the .ini file that is backed up on your PC to the MG 3200.
To save the .ini file to your PC, perform the following steps.
1 From the Embedded Web Server main menu, click Advanced
Configuration.
Result: The Advanced Configuration window appears.
2 On the toolbar, click Configuration File.
Result: The Configuration File window appears.
3 Click Get ini File.
Result: A prompt appears asking you to select a location in which to save
the .ini file.
4 Select a location on your PC and click Save.
Result: The .ini file saved from the MG 3200 to the PC contains only those
parameters that you modified following receipt of the device. The file does
not contain parameters unchanged from their (original) default value.
To set up or confirm trunk settings
You can use the trunk settings to set up the trunks or to confirm the settings
downloaded using TFTP/BootP. Use the following procedures to set up the
trunks for the T1 Lineside CAS protocol.
Contact Center Manager Switch Guide for Communication Server 2x00/DMS
Voice-processing subsystem configuration
185