Nortel Callpilot; Meridian Mail To Callpilot Migration Utility Guide; Nn44200-502 01.02 Standard - Nortel Meridian Mail Utility Manual

Migration utility
Hide thumbs Also See for Meridian Mail:
Table of Contents

Advertisement

98 Chapter 6 Performing post-migration tasks
2
3
4
5
6
7
Copyright © 2007, Nortel Networks
.
a. Create a new ESN prefix (ESN access code and ESN location
code) and a new CDP steering code to correspond to each range
of extension numbers that are left on Meridian Mail.
b. Specify a one-digit overlap for each code.
c. Delete the original ESN prefix and CDP steering code.
Example:If the ESN location code is 338 and mailboxes 1000–3999
exist on Meridian Mail, create new ESN location codes with a
one-digit overlap on Meridian Mail for 3381, 3382, and 3383. Create
CDP steering codes with a one-digit overlap for 1, 2 and 3. The bold
digits represent the 1-digit overlap with the mailbox numbers.
Migrate users from Meridian Mail to CallPilot on the basis of the
user extensions.
Example:Collect and migrate users with extensions 1000–1999.
Delete the migrated mailboxes from Meridian Mail.
Note: Retain the migrated mailboxes on Meridian Mail only
if you want users to receive and send messages from both
Meridian Mail and CallPilot mailboxes.
Create an ESN prefix (ESN access code and ESN location code)
and a CDP steering code for the local site configuration in the
CallPilot network database to correspond with each range of
extension numbers that you migrated from Meridian Mail. Specify a
one-digit overlap for each code.
Example:If you migrate extensions 1000–1999 to CallPilot, create
an ESN location code with a one-digit overlap on CallPilot for 3381.
Create a CDP steering code with a one-digit overlap for 1. The bold
digits represent the 1-digit overlap with mailbox numbers.
Delete the ESN prefixes and CDP steering codes that you create on
CallPilot (for example, 3381 and 1) from the local site configuration
in the Meridian Mail network database.
Add the CallPilot system as a remote site to the Meridian Mail
network database.
Note: Specify the dialing plan as configured on the CallPilot
system (see the configuration diagram on
97)
and step 4).
Tip: If the CallPilot site is an NMS site, define the satellite locations
in a similar manner.
Add the Meridian Mail system as a remote site to the CallPilot
network database.

Nortel CallPilot

Meridian Mail to CallPilot Migration Utility Guide

NN44200-502 01.02 Standard

5.0 17 April 2007
"Dialing plans" (page

Advertisement

Table of Contents
loading

This manual is also suitable for:

Callpilot

Table of Contents