Nortel Meridian Mail Utility Manual page 62

62 Chapter 5 Migrating Meridian Mail data to CallPilot
3
4
5
Copyright © 2007, Nortel Networks
.
Insert the appropriate data tape into the tape drive.
Ensure that you use the tapes in the order in which they were created.
Type readtapelabel at the CI> prompt and then press Enter.
Result: The migration utility displays the tape label as you entered it
during the data collection. Verify that this is the tape from which you
want to transfer data to CallPilot.
Type migrate at the CI> prompt in the MS-DOS window and then
press Enter.
Result: The following prompt appears and displays the first data
migration option:
Enter Data set to migrate:AllSystemData
Tip: Use the arrow down and up keys to view the other migration
options that are available:
• Messages_&_SCCSPrompts
• Messages
• SCCSPromptsOnly
• SystemProfiles
•
Users
• ApplServices
•
SDL
• PDL
Nortel CallPilot
Meridian Mail to CallPilot Migration Utility Guide
NN44200-502 01.02 Standard
5.0 17 April 2007
ATTENTION