Types Of Data Collection - Nortel Meridian Mail Utility Manual

24 Chapter 3 Planning a Meridian Mail data collection
The voice segments or fax items of a Meridian Mail system must be
converted to CallPilot Application Builder applications. The migration utility
migrates the Meridian Mail voice segments and fax items to CallPilot, but it
does not create CallPilot applications. You must create or rebuild CallPilot
applications using Application Builder.
Maximum number of Application Builder applications
When migrating voice segments, take into account the maximum number of
Application Builder applications supported on the CallPilot server.
CallPilot
server
201i
703t
1002rp
1005r
600r
The migration fails if you attempt to migrate more voice segments than
the maximum number of Application Builder applications supported on the
CallPilot server.

Types of data collection

This guide refers to system data and voice message data. System data
includes all data groups, except voice messages and Contact Center
prompts.
Full data collection
A full data collection collects all system data at one time, and then all
voice messages and Contact Center prompts at one time, on one or more
message tapes.
Selective data collection
Selective data collection allows you to gather information from the following
groups individually:
•
•
Copyright © 2007, Nortel Networks
.
Maximum number of
applications
500
2500
2500
2500
2500
system data — system and customer profiles, restriction/permission lists
(RPL), and classes of service (COS)
network data
— You can collect system data and network data on one tape.
— For multicustomer Meridian Mail systems, collect networking data
only from the customers with a full set of networking data.
Nortel CallPilot
Meridian Mail to CallPilot Migration Utility Guide
NN44200-502 01.02 Standard
5.0 17 April 2007
Server volumes where the
applications reside
VS1
VS1, VS102, VS103
VS1, VS102, VS103
VS1, VS102, VS103
VS1, VS102, VS103