Nortel Callpilot; Meridian Mail To Callpilot Migration Utility Guide; Nn44200-502 01.02 Standard - Nortel Meridian Mail Utility Manual

118 Chapter 7 Troubleshooting
Error code
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
MMINPUT error messages 200–299
(MMINPUT errors refer to problems related to accessing the tape drive or files.)
Debug messages:
200–209
Debug messages:
200–209 (continued)
Copyright © 2007, Nortel Networks
.
Message
The Data Type must not be left blank
MM Data Type must be specified
The Key field must have valid treatment code
The Special code must be specified
Default value must be specified
Unexpected number of tokens found in a map record
All the MMail Ids (Group, File & Field) must be specified
If the MMail Ids are specified then Treatment code must be defined
The value obtained from MMail data file is out of range
The string length obtained from MMail data file is out of range
The MMail field data type returned from Extract() is different
The Map record line length exceeds the maximum line length
If the Treatment code is specified then MMail Ids must be defined
Cannot obtain the key field value
The value obtained from MMail data file is out of range
200 — TapeRead Debug
201 — FileCreate Debug
202 — FileOpen Debug
203 — FileRead Debug
204 — FileWrite Debug
205 — Extract Debug
206 — GetToken Debug
207 — FileDump Debug

Nortel CallPilot

Meridian Mail to CallPilot Migration Utility Guide

NN44200-502 01.02 Standard

5.0 17 April 2007