Correcting Precheck Inconsistencies; Nortel Callpilot; Meridian Mail To Callpilot Migration Utility Guide; Nn44200-502 01.02 Standard - Nortel Meridian Mail Utility Manual

108 Chapter 7 Troubleshooting
Correcting errors
Generally, you can use one of the following methods to correct errors:
•
•
If these methods do not correct the errors, contact your Nortel Technical
Support representative.
To revert to the Meridian Mail system
It can be necessary to revert to the Meridian Mail system if you cannot
resolve a migration failure. Before you retry the migration, you must execute
the following on the CallPilot system:
Step
1
2
3
4
5
6

Correcting precheck inconsistencies

Introduction
The precheck application runs automatically when the migrate.exe utility
attempts to migrate Meridian Mail data according to the selected option.
If the precheck finds inconsistencies in the existing Application Builder
applications, the migrate.exe utility stops and displays the following
message:
Analyzing system...
Found inconsistencies!
Unable to continue migration
The recovery procedures allow you to resolve the inconsistencies. You must
determine which applications are inconsistent, then follow the first, second,
and third level recovery procedures (in that order) to attempt to resolve
the inconsistency.
Copyright © 2007, Nortel Networks
.
Correct precheck inconsistencies and rerun the CallPilot migration utility.
Change the values on Meridian Mail, recollect the data, and then
perform the migration again.
Action
Delete network data such as sites, locations, dialing plan information,
and so on.
Delete the users.
Delete the classes of service (COS).
Delete the restriction/permission lists (RPL).
Delete the shared distribution lists (SDL).
Turn off the message waiting indicator (MWI).

Nortel CallPilot

Meridian Mail to CallPilot Migration Utility Guide

NN44200-502 01.02 Standard

5.0 17 April 2007
—End—
Follow Manual Recovery Procedure