Nortel Meridian Mail Utility Manual page 44

44 Chapter 4 Collecting Meridian Mail data
3
4
5
6
Copyright © 2007, Nortel Networks
.
Select the Write All Data soft key by pressing the F3 key.
Result: The Selected Users or the Enter Tape Label screen appears.
Depending on the screen that appeared, proceed as follows.
IF the screen is
Selected Users
Enter Tape Label
Select a data collection option on the Selected Users screen by
using the right or left arrow key.
This screen allows you to collect data for one of the following options.
Option
All
Individual
Volume
COS
Dept
Note: No data is collected if the None option is selected.
Press Enter or the down arrow key.
Result: A list of fields for the selected option appears on the screen.
For example, if you choose the COS option, the following screen
appears.
Nortel CallPilot
Meridian Mail to CallPilot Migration Utility Guide
NN44200-502 01.02 Standard
5.0 17 April 2007
THEN
go to step 5.
go to step 10.
Collected data
All users in the system
Individual mailboxes by mailbox number
All mailboxes in the selected volume
All mailboxes in the selected COS
All mailboxes in the selected department