To enable startup diagnostics
From the Diagnostics Tool window, select Configuration, Maintenance
Startup Diag, Enable.
To disable startup diagnostics
Nortel recommends that you leave the startup diagnostics turned on.
When you disable CallPilot startup diagnostics, you prevent CallPilot from
automatically identifying hardware problems that may exist when the system and
the services start (DSP, TimeSwitch, MediaBus).
SU04 (Service Update 4) for CallPilot 5.0 changes the default diagnostic settings.
With SU04 installed, diagnostics do not run on a scheduled soft reboot, but run on
an unscheduled hard reboot or shutdown. Consult Nortel Technology for details.
On the Diagnostics Tool window, select Configuration, Maintenance
Startup Diag, Disable.
PEP Maintenance utility
The PEP Maintenance utility displays a list of all installed PEPs on the
server. You can also uninstall PEPS.
For information about installing or uninstalling PEPs, see the CallPilot
Software Administration and Maintenance guide.
Copyright © 2009, Nortel Networks
.
ATTENTION
ATTENTION
Nortel CallPilot
202i Server Maintenance and Diagnostics
NN44200-708 01.02 Standard
5.0 11 August 2009
PEP Maintenance utility 71