Table of Contents
Advertisement
▪
When Chart (High Resolution) is selected, the chart shows the changes of the
selected input (for example, the pressure per minute). The screen shows the
changes for the last 4 minutes. It also shows the value at that selected time.
▪
The switch button (icon) to select other screens is changed into a small chart and is
highlighted (active).
▪
When the Chart (Medium Resolution) is selected, the screen shows the changes of
the selected input per hour. The screen shows the last 4 hours.
▪
When the Chart (Low Resolution) is selected, the screen shows the changes of the
selected input per day. The screen shows the operation for the last 10 days.
3.4.4 Selection of a main screen view
To change between the different screen layouts, select the far right icon in the control
icons line (refer to value lines display icon or chart display icon in
and push the Enter key. A screen similar to the one that follows is shown:
Select the necessary layout and push the Enter key. Refer to
6996022910_B
6996022910_B - Airlogic graphic regulator
Page 28
Icons used
on page 23)
Inputs menu
on page 30.
09/2021 - ©Edwards Limited
Advertisement
Table of Contents
