▪
Select the necessary control mode.
▪
Push the Enter key on the controller.
▪
The selected control mode is shown on the Main screen. Refer to
page 23 for the meaning of the icons.
3.10 Service menu
Menu icon, Service
Function
▪
To reset the completed service plans
▪
To do a check of the service intervals of the service plans
▪
To find out which service plans were completed in the past
▪
To modify the programmed service intervals.
Procedure
Start from the Main screen (refer to
▪
Use the Scroll keys to move the cursor to the Menu action button.
▪
Push the Enter key. The screen that follows is shown:
6996022910_B
6996022910_B - Airlogic graphic regulator
Main screen
Page 37
on page 25):
09/2021 - ©Edwards Limited
Icons used
on