Outputs Menu - Edwards EOSi Series Instruction Manual

Set as Main Chart Signal.

3.7 Outputs menu

Menu icon, outputs
Function
To show the information about the measured data and the status of different outputs
(for example, motor over‑load protection).
Procedure
Start from the Main screen (refer to
▪ Use the Scroll keys to move the cursor to the Menu action button and push the
Enter key. The screen that follows is shown:
1. Menu 1. Menu
▪ Use the Scroll keys to move the cursor to the outputs icon (refer to menu icon).
▪ Push the Enter key. A screen almost the same as the one below is shown:
6996022910_B
6996022910_B - Airlogic graphic regulator
Main screen
Page 33
on page 25):
2. Regulation 2. Regulation
09/2021 - ©Edwards Limited