Chart Views - Edwards EOSi Series Instruction Manual

* Text changes upon the pump's actual condition.
▪ Section A: shows the information about the pump operation (for example, the inlet
pressure or the temperature at the pump outlet). On the pumps with a frequency
converter, the load degree (flow given in %) of the maximum flow of the actual
inlet pressure.
▪ Section B: shows the status icons. The types of icons shown in this section are:
▪ Section C: The status bar shows the text that is related to the selected icon.
▪ Section D: shows the action buttons. These buttons are used:
The function of the action buttons is related to the displayed menu. The most used
functions are:
Designation
Menu
Modify
Reset
To select an action button, use the Scroll keys and push the Enter key.
To go back to the previous menu, push the Escape key.

3.4.3 Chart views

You can look at a graph (alternative to view values) of the input signals against time.
Refer to
6996022910_B
6996022910_B - Airlogic graphic regulator
▪ Fixed icons: These icons are always shown in the main screen and cannot be
selected by the cursor (for example, pump stopped or running, pump status
(running, running unloaded or motor stopped).
▪ Optional icons: These icons are only shown if their related function has been
selected (for example, week timer, ARAVF, etc.).
▪ Pop up icons: These icons appear if an unusual condition occurs (for
example, warnings shutdown and service plans). For more information
about the icons, use the Scroll keys to select the icon and push the Enter key.
▪ to select or change settings
▪ to reset a motor overload, a service message or the emergency stop
▪ to have access to all the data collected by the controller.
Function
To go to the menu
To change the programmable settings
To reset a timer or message
Inputs menu on page 30.
Page 27 09/2021 - ©Edwards Limited