Safety And Compliance; Definition Of Warnings And Cautions; General Safety Precautions - Edwards EOSi Series Instruction Manual

1. Safety and compliance

1.1 Definition of Warnings and Cautions

NOTICE:
For safe operation from the start, read these instructions carefully before you install
or commission the equipment and keep them safe for future use.
Read all the safety instructions in this section and the rest of this manual carefully
and make sure that you obey these instructions. The equipment must only be
operated and maintained by trained personnel in the proper condition and as
described in this instruction manual.
Obey local and state requirements and regulations. If you have any questions about
safety, operation or maintenance of the device, please contact our nearest subsidiary.
Important safety information is highlighted as warning and caution instructions. Obey
these instructions.
WARNING:
If you do not obey a warning, there is a risk of injury or death. Different symbols are
used according to the type of hazard.
CAUTION:
If you do not obey a caution, there is a risk of minor injury, damage to equipment,
related equipment or process.
NOTICE:
Information about properties or instructions for an action which, if ignored, will
cause damage to the equipment.
We reserve the right to change the design and the stated data. The illustrations are not
binding.
Keep the instructions for future use.

1.2 General safety precautions

WARNING: AUTOMATIC RESTART
Risk of injury and damage to equipment. If the pump has an automatic restart
function and it is set to on, the pump will restart automatically when the power is
restored after the power interruption.
6996022910_B
6996022910_B - Safety and compliance
Page 7 09/2021 - ©Edwards Limited