Control Panel; Figure 8 Controller - Edwards EOSi Series Instruction Manual

3.2 Control panel

Figure 8 Controller

Designation
Reference
1 Display
2 Pictograph
3 Pictograph
4 General alarm LED
5 Pictograph
6 Service LED
7 Automatic operation LED
8 Voltage on LED
9 Pictograph
10 Enter key
11 Escape key
12 Scroll keys
13 Stop button
14 Start button
6996022910_B
6996022910_B - Airlogic graphic regulator
Function
Shows the status of the pump and the different icons to
move through the menu.
Automatic operation
General alarm
Flashes if a shutdown warning condition occurs.
Service
Flashes if a service is necessary.
Shows that the controller automatically controls the
pump.
Shows that the voltage is switched on.
Voltage on
To select the parameter shown by a horizontal arrow. Only
the parameters followed by an arrow that point to the
right can be changed.
To go to previous screen or to end the current action.
Keys to move through the menu.
To stop the pump. Automatic operation LED goes out.
To start the pump. Automatic operation LED flashes to
show that the controller is in operation.
Page 22 09/2021 - ©Edwards Limited