Purpose Of This Manual - Analog Devices ADSP-BF537 EZ-KIT Lite Manual

The EZ-KIT Lite board has flash memory with a total of 4 MB. Flash
memory can be used to store user-specific boot code, allowing the board
to run as a stand-alone unit. For more information, see
on page 1-15. The board also has 64 MB of SDRAM, which can be used
by the user at runtime.
interfaces with the audio circuit, facilitating development of audio
SPORT0
signal processing applications.
nector for communication with other serial devices. For more
information, see
The UART of the processor connects to an RS-232 line driver and a DB9
female connector, providing an interface to a PC or other serial device.
Additionally, the EZ-KIT Lite board provides access to all of the proces-
sor's peripheral ports. Access is provided in the form of a three-connector
expansion interface. For more information, see
page 2-7.

Purpose of This Manual

The ADSP-BF537 EZ-KIT Lite Evaluation System Manual provides
instructions for installing the product hardware (board). The text
describes operation and configuration of the board components and pro-
vides guidelines for running your own code on the ADSP-BF537 EZ-KIT
Lite. Finally, a schematic and a bill of materials are provided as a reference
for future designs.
VisualDSP++ users should use this manual in conjunction with the Get-
ting Started with ADSP-BF537 EZ-KIT Lite, which familiarizes users with
the hardware capabilities of the evaluation system and demonstrates how
to access these capabilities in the VisualDSP++ environment.
ADSP-BF537 EZ-KIT Lite Evaluation System Manual
SPORT0
"SPORT0 Audio Interface" on page
"Flash Memory"
also connects to an off-board con-
2-4.
"Expansion Interface" on
Preface
xiii