Installation And Connection; Overview Of The Combivert F6; Figure 14: F6 Housing 2 Top View - KEB COMBIVERT F6 Series Instructions For Use Manual

OVERVIEW OF THE COMbIVERT F6

5 Installation and Connection

5.1 Overview of the COMbIVERT F6
Housing 2
1
6
6a
Figure 14: F6 housing 2 top view
No. Name
Fixing points for the optional shielding
plates. The shielding e.g. from the
motor cable is laid on the mounting
plate in the control cabinet or on the
shield connection braket (optionally
available).
Control unit:
1 /
2 ---
6a
•
Power unit:
3
•
•
3
LEDs (=> manual for control unit
chapter "Overview")
2
For control board COMPACT:
FS without function.
4
•
2 ---
•
3 --- Nameplates
Diagnostic interface with RS232/485
4 X4A interface according to DIN 66019II
protocol / operator slot
Power circuit terminals for:
•
5
5 X1A •
•
•
Protective earth;
at connection to protective earth
6 PE
each terminal may be assigned only
once.
Description
00F6V80-2000
Built-in version
00F6V80-2001
Push-through version
00F6V80-2002
For control board COMPACT:
FS without function
For control card APPLICATION
and PRO:
Status indication of the safety
module
Mains input
Braking resistor
DC supply
Motor connection
51