Transferring Configuration And Firmware Files With Xmodem; Using The Console Port - Netopia Router PN Series Reference Manual

10-12 Reference Guide
Transferring configuration and firmware files with XMODEM
You can transfer configuration and firmware files with XMODEM
through the Netopia Router's console or PC Card (PCMCIA) port.
To go to the PC Card Config/Firmware Transfer screen, select
PC Card Config/Firmware Transfer in the Advanced Configuration
screen.
PC Card Config/Firmware Transfer
Send Firmware to Netopia...
Send Config to Netopia...
Receive Config from Netopia...
PC Card Modem Init String:
The transfer you initiate will occur through the port from which you
initiate it. If you are connected to the Netopia Router through its
console port, the transfer will occur through that port. If you are
connected through the PC Card port, the transfer will occur through
that port.

Using the console port

Using the Netopia Router's screens through the console port.
involves using either a PC or Macintosh computer with a terminal
emulation program that supports XMODEM file transfers.
See the Getting Started Guide for directions on how to configure
your terminal emulation program.
AT&F&C1&D2E0S0=1\J0\Q3