Wan Ip Address Serving - Netopia Router PN Series Reference Manual

2-48 Reference Guide

WAN IP Address Serving

Main
Menu
Small Office ISDN
models only
To allow calls that only match a connection profile's remote IP
and/or IPX address:
Toggle Must Match a Defined Profile to Yes, and
set Authentication to None.
To not allow any incoming calls to connect to the Netopia Router:
Toggle Must Match a Defined Profile to Yes, and
Set the Dial option in the Telco Options screen of every con-
nection profile to Dial Out Only
Advanced
Config.
The Netopia Router supports WAN IP Address Serving.
With WAN IP Address Serving the Netopia Router serves an IP
address to an incoming call. The incoming caller can be either a TA
(Terminal Adapter), such as the Netopia ISDN Modem, or another
Netopia Router with the NAT (Network Address Translation) feature
set. The incoming caller will dynamically obtain an IP address from a
pool of IP addresses that the Netopia Router serves.
The Netopia Router serving the IP address should have a connection
profile with an IP address of 0.0.0.0 defined for the calling TA or
router.
IP Address
Serving