Adding A Filter Set - Netopia R2020 User Reference Manual

3. View, change, or delete individual filters and filter sets.
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set can contain up to 16 output filters and up
to 16 input filters.
To add a new filter set, select Add IP Filter Set in the IP Filter Sets screen and press Return to go to the Add
Filter Set screen.
Note: There are two groups of items in the Add Filter Set screen, one for input filters and one for output filters.
The two groups work in essentially the same way, as you'll see below.
Filter Set Name:
Display/Change Input Filter...
Add Input Filter...
Delete Input Filter...
Display/Change Output Filter...
Add Output Filter...
Delete Output Filter...
ADD FILTER SET
Configure the Filter Set name and its associated Filters.
Naming a new filter set
All new filter sets have a default name. The first filter set you add will be called Filter Set 1, the next filter will be
Filter Set 2, and so on.
To give a new filter set a different name, select Filter Set Name and enter a new name for the filter set.
To save the filter set, select ADD FILTER SET. The saved filter set is empty (contains no filters), but you can
return to it later to add filters (see
before saving it (see "Adding filters to a filter set" on page
Select CANCEL to leave the Add Filter Set screen without saving the new filter set and return to the Filter Sets
screen.
Add IP Filter Set
"Modifying filter sets" on page
Filter Set 2
CANCEL
14-17). Or you can add filters to your new set
14-14).
Security 14-13